Sunday 5 September 2010

TUTORIAL: faldilla en un dia - skirt in a day




Aqui teniu una tutorial per fer-vos una faldilla treient el patro d'una que ja tingueu. Es molt senzilla i no cal tenir molta experiencia cosint. Es la segona que he fet, encara he de practicar mes, pero ja vaig millorant!

Here's a tutorial to make a skirt by taking the pattern form one that you already have. It is very simple and it doesn't require to have a lot of experience. This is the second one I've made, I still need to practice more, but I'm getting better!




MATERIALS:
- roba per l'exterior: depenent de la llargada que volgueu, jo he fet servir 1.5 m de Optic Blossom de l'Amy Butler (i me'n ha sobrat)
- roba pel forro: si pot ser de coto millor, jo he trobat 70% coto i 30% polyester.
- cremallera invisible de 20c


- outer fabric: depending on the desired length, I used approx 1.5 yards of Amy Butler's Optic Blossom.
- fabric for lining: I found 70% cotton and 30% polyester and it works well.
- 10" invisible zipper.

renteu i planxeu les robes abans de tallar-les
wash and press the fabrics before cutting





INSTRUCCIONS
INSTRUCTIONS

1. Agafo la faldilla de model.
1 Take a skirt as a model.


2. Doblegueu-la per la meitat i poseu la part recta al canto recte del paper de patro. Dibuixeu sobre el paper la forma de la faldilla deixant 1cm de marge. La llargada la trieu vosaltres (jo la volia una mica mes llarga). Ara teniu el patro de la PART FRONTAL.
Assegureu-vos que la cintura fa una corva cap amunt, anant cap al costat, i tambe a la part d'abaix.

2. Fold it in half and place the straight side onto the straight side of the paper. Draw along the outline, leaving 1/2 seam space. You can choose your desired length (I wanted my skirt a bit longer than the one I have). Now you have the pattern for the FRONT PANEL.
Make sure you respect de slightly curved shape of the waist as well as the bottom line.


3. Per fer el patro de la part del darerre, agafeu el patro de la part frontal i poseu la part recta paralel.la a la part recta del paper, deixant 1 cm entre les dues linees. Dibuixeu el perfil de la resta, aquest cop tal com es. ( a la foto he mogut el patro posant els dos costats rectes junts, perque veieu la linea que sobresurt). Ara teniu el patro de la PART DEL DARRERE.

3. To make the back panel, take the pattern you cut of the front panel and trace it, leaving a space of 1/2" between the straight line and the straight line of the paper. (you'll see in the photo that I have moved the pattern placing both straight lines together, so you see the line on the other side. This is the BACK PANEL.

4. Per tallar la part del davant, doblegueu la roba i poseu el patro amb la part recta sobre el doblec, aguanteu el patro amb unes quantes agulles, dibuixeu el perfil i talleu la roba, de manera que us quedara una sola pec,a quan la desplegueu.
4. To cut the front panel, fold the fabric and place the pattern with the straight side on the fold, place some pins, draw the outline onto the fabric and cut out the fabric. You will have one piece when you unfold it.

5. Per tallar el darrere, necessiteu tallar dues peces. Doblegant la roba amb la cara del dret tocant-se, poseu el patro amb la part recta tocant molt a prop del doblec. Poseu-hi agulles, dibueixeu el voltant i talleu les peces.

5. Now you need to cut 2 back panels. Fold the fabric so the right side faces itself, place the pattern with the straight line very close to the fold. Outline and cut.


6. Ara ja teniu les 3 peces amb la roba exterior. Feu el mateix amb la roba del forro.
6. Now you have the 3 panels with the outer fabric. Do the same for the lining.

7. Les tres peces tallades pel forro, que son 2cm mes curtes que la roba exterior.
7. The three pieces for the lining that are 1" shorter than the outer fabric.



8. Ara agafareu la cremallera invisible que heu comprat. L'obriu i planxeu sobre les dentetes, de manera que no quedi l'arruga que normalment hi ha just al costat de les dents. 

8. Take the invisible zipper and iron over the coils so the little wrinkle that is always there disappears. 



9. Amb el punt de zig zag i controlant la llargada i l'amplada del punt (a mi m'agraden punts curts i no gaire amples: llargada 2 i amplada 3), cosireu un zig zag sobre el marge recte de les dues peces del darrere (les que queden al mig).

9. Set your machine on zig zag stitch (I use length 2 and width 3) and sew along the raw edge of the central straight line of both of the back panels.


punt de zigzag
zigzag stitch

10. Ara col.loqueu la cremallera boca avall sobre la part central de la pec,a del darrera (la part recta), i assegurant-vos de que la pec,a del darrera esta del dret, com a la foto.
10. Place the zipper facing down onto the straight central side of the back panel (like in the photo), holding it with pins.

11. Cosiu just seguint la linea de les dentetes, cosint el mes a prop que pogueu d'elles. Si teniu un peu per cosir cremalleres es el millor.
11. Sew along the coils, as close as you can from them. Using a zipper foot on your machine will give you the nest result.


12. Feu el mateix amb l'altre costat de la cremallera i posant-lo sobre l'altr pec,a del darrere. 
Si feu servir el peu per cosir cremalleres a la maquina, haureu de canviar el costat del peu (veure la seguent foto).
12. Do the same with the other side of the zipper, placing it onto the other side of the back panel and changing the side of your zipper foot to sew along the coils again (see below).



13. Ajunteu les dues costures que heu fet abans amb zigzag (els costats rectes de la part central) i cosiu des del final de la cremallera fin abaix de tot, deixant 1cm de marge.
13. Now sew a 1/2" seam from the end of the zipper down to the bottom of the skirt, placing the two straight sides together (where you zig zagged before). 











14. Planxeu la costura central oberta.
14. Press the centre seam open.

15. Cosiu les costures dels costats a 1 cm, cosiu amb punt de zig zag perque no es desfili i planxeu-la cap a la part del darrere.
15. Sew 1/2" seam along both sides of the skirt, zig zag and press towards the back of the skirt.

16. Cosiu al voltant de la cintura deixant 1/2cm de marge.
16. Sew along the waist line leaving 1/4" from the raw edge.

17. Planxeu la cremallera (la primera vegada em va sortir molt millor!)
17. Press over the zipper (it came out better on the first skirt I made!)

18. Seguiu els passos 13-17 per fer el forro. ATENCIO: comenceu a cosir la costura de la part central del forro a la mateixa alc,ada del final de la cremallera cosida a la roba del exterior (a uns 20 cm a la meva faldilla)
18. Follow steps 13 - 17 to make the lining. WARNING: Make sure you start sewing the central seam about 10" down, at the same height of the end of the zipper sewn on the outer fabric.


19. Fiqueu el forro dins de la faldilla amb les cares del dret tocant-se.
19. Place the lining inside the skirt with RIGHT sides facing

Poseu-hi agulles i cosiu 




















a tot el voltant de la cintura.





















Hold it with ins and sew all around the waist line.
























20. Feu petits tallets a cada 4 cm al voltant de la cintura procurant no tallar la costura.






















20. Make little cuts every 2" along the waist seam making sure you don't cut the seam.



21. Doneu la volta al forro, de manera que la faldilla quedi del dret i planxeu be la costura.
21. Turn the lining inside de skirt so the RIGHT side of the outer fabric is on the outside and press the seam.




22. Feu puntades a ma per cosir el forro a la cremallera.
22. Hand sew a slip stitch to join the lining with the zipper.

23. Cosiu al voltant de la cintura, deixant un marge de 1/4 cm, per enfortir-la mes.
23. top stitch the waist line to give it more strength.


24. Finalment, cosiu la vora, doblegant primer 1/2cm i despres 1cm mes ajudant-vos amb la planxa. Ho podeu fer a ma (com vaig fer amb la primera faldilla) o a maquina, amb aquesta ho he volgut provar a maquina. Feu el mateix amb la vora del forro, que sera mes curt.
24. Finally, for the bottom seam, fold in 1/4" pressing it with the iron and fold again 1/2" more. You can hand sew the seam or you can use your machine. I tried doing it with the machine this time.




8 comments:

  1. Amb aquest tutorial sembla molt senzill, però jo no en tinc ni "pajolera" de cosir a màquina. A veure si com a nou propòsit, n'aprenc i faig alguna coseta...

    ReplyDelete
  2. Nena!! Quin super titorial... queda apuntat a la gran llista de coses pendents, perquè no tenen més hores els dies?

    ReplyDelete
  3. Síííí
    per fi un tutorial "Com Déu Mana" de cosir una cremallera invisible... si us ensenyés les marranades que he arribat a fer!!!

    ReplyDelete
  4. Hello Colleen,
    I sew clothes too, so we have that in common. Wonderful to meet someone from Ireland. Where are you from originally?
    Loved your tutorial.
    Micki

    ReplyDelete
  5. Hi Micki, I'm originally from Barcelona although I've been here for quite a while. Good to know there's a closer blogger!

    ReplyDelete
  6. I love the look of this skirt! Nice job!

    girlygirlcrafts.blogspot.com

    ReplyDelete
  7. Xulo! El comparteixo, segur que interessa a les nostres clientes més "novates"!

    ReplyDelete

I love your comments! M'agraden els vestries comentaris!

LinkWithin

Related Posts Plugin for WordPress, Blogger...